KG910-type open-air down-the-hole drill carriage reserves the feature of simple structure and steady performance of KY100-type drill carriage. The hydraulic system, traveling unit and gyrator are optimized and upgraded, so that the rotary speed and advance rate are quicker and the motor is more reliable with longer service life.
KG910-type open-air down-the-hole drill carriage reserves the feature of simple structure and steady performance of KY100-type drill carriage. The hydraulic system, traveling unit and gyrator are optimized and upgraded, so that the rotary speed and advance rate are quicker and the motor is more reliable with longer service life.
Model |
KG910A |
KG910B |
KG910D |
|
Rock Hardness |
F=6-20 |
|||
Hole Diameter |
Ф80-105mm |
|||
Economic Drill Depth |
25m |
|||
Pressure |
0.7-1.0Mpa |
|||
Air consumption |
9-13m3/min |
|||
Rotating Speed |
0-105r/min |
0-120r/min |
||
Rotation Torque |
980N.m |
|||
Lifting Capacity |
15000N |
|||
Propulsion Type |
Hydro-Cylinder-Chain |
|||
propulsion Length |
2000mm |
|||
Grade Ability |
30° |
|||
Ground Clearance |
254mm |
|||
Walking Speed |
0-2.0km/h |
|||
Carriage Rising Angles (°) |
Blow 118.5,elevation23.5, total 142 |
|||
Carriage Swing Angle(°) |
Left36.5,righ11.5,total 48 |
|||
Drill Arm Rising Angle(°) |
35°~ 60° |
|||
Carriage Compensation |
900mm |
|||
Engine |
ZS1125GM |
YC2108 |
Electric motor |
|
Power |
20.2KW |
33KW |
22KW |
|
Drill Rod |
Φ60*2000mm |
|||
Overall Dimension(L*W*H) |
4100×2030×2020(mm) |
|||
Total Weight |
3100kgs |
3400kgs |
3400kgs |
KG910 comparing with KY100
Model |
KG910 |
KY100 |
Comprarison |
Engine |
Yuchai Engine YC2108 |
Yuchai Engine YC2108 |
/ |
Traveling unit |
Motor + slowdown structure |
Direct-connected ball motor |
Reduce the pressure of motor and enhance the service life of motor |
Travelling pressure |
11Mpa |
14-16 Mpa |
|
Rotary motor |
Cycloid motor |
Steel ball motor |
increase motor service life |
Rotary speed |
85r/min(diesel 1700r/min) |
70r/min(1700) |
20% |
Hydraulic system |
19.2 pump, fast rotation/ fast lift valve group, new splite-flow valve |
16 pump |
Increase flow |
Feeding speed |
336mm/s |
280mm/s |
20% Increase |
Recommended drill tools
Drill bit |
90mm |
Drill rod |
Φ60*2000mm |
Hammer |
Φ90 |
KG series is revised on the basis of KY series, which maintains the simple structure and stable performance of KY series and upgrades the hydraulic system, travelling unit, gyrator, power, gas path system, drill arm component and rack unit, enjoying increased power, stronger climbing ability, more reasonable drilling angle, faster rotation and advancement speed, longer-term motor service life and better reliability. This drill is widely used in blasthole drilling of large- and medium-sized open-air mining, water conservancy, power station and road paving projects. Applicable rock hardness: F=6-20, drilling diameter: 80-165mm, economic drilling depth: 12-25m.